| Has anyone tried to use the HSS Square tool bits that you can get from a machine shop supply house? I'm very new to this having just retired and an interest in engraving since I was a kid have finally decided to try my hand at it and hopefully I'll be able to attend a school after the first of the year I'm using a Gravermiester Thanks Bob |
Posted by Bob Bullard at 10/31/2006 6:58:39 PM.
| I have used them quite a lot and they work as good as any HSS gravers from the usual engraving sources... the only problem is finding then in smaller thicknesses than 1/8". |
Posted by Stu Millar at 11/1/2006 12:00:26 AM.
| Bob, Your best bet would be to contact Ray Phillips at the Ngraver Company #1-860-823-1533. He can supply you with Carbide and Cobalt gravers. Yours truly, JJ Roberts School of Artistic Engraving Manassas, VA www.angelfire.com/va2/engraver |
Posted by J.J Roberts at 11/1/2006 8:09:03 AM.
| thank you for the quick answer, As I browse this web site and thumb thru the Engraver news letter I'in constant awe of the skill and talent that is often displayed, also of the knowledge that is so freely shared. When I first started to have an intrest in this art to find someone willing to share their knowledge was almost impossible. |
Posted by Bob Bullard at 11/1/2006 9:16:56 AM.
| i've had excellent results with stuff called momax purple label. i have cut some pretty fierce stuff with these blanks. |
Posted by j.d. swartzfeger at 12/28/2006 6:43:47 PM.
Records 1 to 5 of 5