Welcome to the FEGA FORUM for Buying & Selling!
If you have equipment would like to buy or sell post the information here.
A forum where FEGA members can sell the tools they are not using or find tools or equipment they need. |
|
|
|
|
|
|
Buy/Sell
|
|
|
Topic: GRS GraverMax and GRS Power Hone for Sale Number of Responses: 2
For Sale
1 GRS GraverMax with QC 901 and QC 710 hand pieces.
1 GRS Quick Change sharpening system
includes: Power Hone W/ Quick change wheel,260 600 1200 Diamond wheels, Ceramic Lap
QC Sharpening Fixture, Wheel storage rack.
I am asking $ 1050.00 for everything listed above
If interested contact: Bill Rice
email: billrice@mdsharp.com or call 805-431-1009 |
Posted by: William Rice - 1/18/2011 2:55:22 AM.
Most recent response - 1/31/2012 4:49:26 PM. |
Topic: burr king for sale Number of Responses: 1
| burr king 960-272,1 hp nema 4 dc control box wired for 120v.provides constant torque,even at lowest speed.comes with a knife makers attachment,never installed or used,same goes for the belt guard.8"contact wheel.its like new,only used about 10 belts on it.also box of new 3M belts.$2500,mike tundratrekers@mtaonline.net ,907-892-8073 serious calls please |
Posted by: mike ladan - 12/30/2008 3:03:21 PM.
Most recent response - 12/27/2011 10:41:24 PM. |
Topic: i am looking for GRS Engraver set use Number of Responses: 0
hello
i am a student in jewelry and i am looking for GRS engraver set for starte
if your have some stock to sell
contact me tanks
soussi2@yahoo.com |
Posted by: mat soussi - 9/29/2011 5:08:23 PM.
Most recent response - 9/29/2011 5:08:23 PM. |
Topic: GRS Engraver set Number of Responses: 1
1 GRS GraverMach (new).
1 Magnum QC hand piece (new).
1 QC 710 hand piece.
1 022-581 Engraver kit Quick Change (new).
$ 1700.00 for everything listed above plus shipping. Can email pictures.
If interested contact: Alford Barnett
email: alfordbarnett@yahoo.com or call 706-513-9781. |
Posted by: Alford Barnett - 5/13/2011 12:24:24 PM.
Most recent response - 9/29/2011 5:01:48 PM. |
Topic: Acrobat video magnifier Number of Responses: 0
Hi
I have a brand new Acrobat video magnifier for sale. Great for engraving classes or demonstrations. All in one easy to setup package.
Comes with carrying case.
$2495.00 retail.
$1800 plus shipping
Thanks,
Jeff
kutter@customknives.net
406.821.1060
Product info http://www.enhancedvision.com/low-vi...agnifier.html#
|
Posted by: Jeffrey Harkins - 2/13/2011 1:09:11 PM.
Most recent response - 2/13/2011 1:09:11 PM. |
Topic: Antique engraving tool set for sale. Number of Responses: 7
I am an Antiques dealer and recently purchased a complete set of engraving tools which belonged to John Derr, a Berks County PA gunsmith, who worked from about 1810 to 1860. I was hoping to see if anyone in FEGA would be interested in these great tools, even though I was reasonably sure they would strictly be as a Collectors item. There are 24 tool handles w/blades on top shelf of the home made box, below that area there is a panel that is a hidden drawer. When that is removed, there are two drawers on either side. There must be about 100 extra blades of different types, 2 hammers and a tool to remove the blades from the handles.....I think the blades are case hardened. If anyone is intersted they can contact me via email. Regards, Joanne Conti
cyclist@verizon.net
|
Posted by: Bill Gamradt - 4/26/2007 8:48:06 PM.
Most recent response - 8/29/2010 5:21:14 PM. |
Topic: Source for Used Microscopes Number of Responses: 0
I recently purchased a used B&L/Leica stereo microscope (on Ebay). I received a good product & was treated very fairly.
I told the seller my needs, as an engraver, & he seemed to go out of his way to accommodate my questions & concerns about spacing, etc.
I can't guarantee anything, but if you would like to contact him . . . his name is Bruce Heckbert & his e-mail address is: lbheckbert@comcast.net.
Please, inform him of your spacing & magnification needs, as an engraver.
It might also help to tell him that Ron Foster, another engraver, was very happy with a recent purchase & recommended his products.
Good Luck,
Ron |
Posted by: Ron Foster - 3/5/2009 10:43:53 PM.
Most recent response - 3/5/2009 10:43:53 PM. |
Topic: john madole rifle Number of Responses: 1
| Fine John Madole rifle for sale/Volumes/090116_1307/Ray's email pix/background.psd |
Posted by: raymond roberts - 1/19/2009 9:15:34 AM.
Most recent response - 1/19/2009 9:15:34 AM. |
Topic: stand up vice Number of Responses: 6
| WANTED!!!!!stand up vice for hammer & chisel work.asap.please help.mike tundratrekers@mtaonline.net 907-892-8073 |
Posted by: mike ladan - 12/11/2008 11:30:29 PM.
Most recent response - 12/31/2008 12:42:43 PM. |
Topic: tools for sale Number of Responses: 1
| 5"luxolamp magnifier from brownells w/4-5 extra bulbs,325,its as new.dual angle shrpener w/post base $150,grs pitch cup and bowl 50,contour jaws 45,large block shelf w/adjustable bracket 50,crocker sharpener from brownells 45,300 for all,or will sell individualy.all are as new!God bless, mike tundratrekers@mtaonline.net,907-892-8073 |
Posted by: mike ladan - 12/30/2008 3:12:34 PM.
Most recent response - 12/30/2008 3:13:49 PM. |
|
|